 
Ventilator System
ST-FHK-002
Sparco introduces an enclosure ventilation device,
featuring a molded in place gasket that ensures a tight seal and
eliminates the loose, separate gasket required in other models.
Included is a compatible fan holder accessory, used with a standard
fan (included), to eliminate heat in applications where forced air transfer is
required. The ventilation device and combined fan/fan holder offers an efficient assembly for applications where electronic equipment
must be cooled.
These ventilation devices are used in pairs, on opposing exterior
sides, to permit passive cross flow ventilation. The ventilation
device is made of UL 94 V-0 polycarbonate plastic. This device,
suitable for outdoor use, can be subjected to UV light and water
exposure. Protection is rated at IP 44. Dimensions are approximately
50 mm x 70 mm x 20 mm high (2" x 2.75" x 0.8" high).
The fan holder accessory, placed inside the enclosure and mounted
opposite the ventilation device, is compatible with a standard 40 mm x
40 mm (1.6" x 1.6") fan with maximum height of 15 mm (0.6"). This fan
holder is made of the same polycarbonate material as the ventilation
device and has the same specifications.
This is sold as a complete assembly - Ventilation
System, Fan Holder and Fan.
|
