Site Survey Report

Generating this example site survey report took alltogether 12 minutes from starting the survey to the point the report was finished.

Required items:
Laptop / Table PC running Windows 2000/XP [Requirements]
Supported Wi-Fi card [Supported cards]
Map / Floorplan of the site
Ekahau Site Survey 2.0 with Advanced Reporting feature.
 

You can customize this template any way you like: add your company logo, add / remove survey information etc.

General Information
Report date 3.12.2003 15:53
Map: Office
Surveys Selected 3 out of 3
Access Points Selected 8 out of 8
Sample Points and Access Point Locations
 



 

Selected Surveys

Name Created Modified Record Time
Dec 3, 2003 2:54:35 PM 3.12.2003 14:54:35 3.12.2003 15:01:31 6:56
Dec 3, 2003 3:02:51 PM 3.12.2003 15:02:55 3.12.2003 15:03:20 25
Dec 3, 2003 3:05:17 PM 3.12.2003 15:05:20 3.12.2003 15:05:57 37

Survey Notes

Name Notes
Dec 3, 2003 2:54:35 PM Long survey around the site.

Scanned both 802.11a and 802.11b networks simultaneously.

Hidden networks also detected.
Dec 3, 2003 3:02:51 PM Short Survey around a perimeter previously left unsurveyed.

Scanned both 802.11a and 802.11b networks simultaneously.

Hidden networks also detected.
Dec 3, 2003 3:05:17 PM Survey outside the office area, in the corridor.

Scanned both 802.11a and 802.11b networks simultaneously.

Hidden networks also detected.


 

Selected Access Points

ESSID Name Channel Band
  Unknown (Rogue?) 11 802.11b
2100 00:50:DA:90:62:5C 11 802.11b
2100 00:50:DA:92:87:B2 6 802.11b
Iikku Cisco 1 44 802.11a
Maria Symbol 1 6 802.11b
Maria Symbol 2 1 802.11b
Maria Cisco 2 11 802.11b
Nina Lucent 6 802.11b

Access Point Notes

Name Notes
Unknown (Rogue?) Rogue Access Point
Not Broadcasting ESSID
Todo: find, investigate and destroy
00:50:DA:90:62:5C Located most likely outside the office area
(see AP location)

Todo: set own APs to correct channels to avoid interference
00:50:DA:92:87:B2 Located most likely outside the office area
(see AP location)

Todo: set own APs to correct channels to avoid interference
Cisco 1 IP: 192.168.1.207
Output Power: 100mw
Antenna: Omni, external
Mounting: Wall
Installer: E. Iglezius
Symbol 1 IP: 192.168.1.202
Output Power: 25mw
Antenna: Omni, external
Mounting: Wall
Installer: Armando Rodriquez
Symbol 2 IP: 192.168.1.203
Output Power: 25mw
Antenna: Omni, external
Mounting: Wall
Installer: Armando Rodriquez
Cisco 2 IP: 192.168.1.202
Output Power: 25mw
Antenna: Omni, external
Mounting: Ceiling
Installer: M. Nykanen
Misc: Installed above the false ceiling
Lucent IP: 192.168.1.201
Output Power: 50mw
Antenna: Omni, integrated
Mounting: Ceiling
Installer: Hesus Rodriquez

Visualization

Signal Strength
Signal Strength coverage (RSSI) of the selected access points. The strongest RSSI is shown per location.
-90,0..-85,0 -85,0..-80,0 -80,0..-75,0 -75,0..-70,0 -70,0..-65,0 -65,0..-60,0 -60,0..-55,0 -55,0..-50,0
-50,0..-45,0 -45,0..-40,0 -40,0..-35,0 -35,0..-30,0 -30,0..-25,0 -25,0..-20,0 -20,0..-15,0 -15,0..-10,0



 

Signal-to-Noise Ratio
Calculated signal to noise ratio. Simplified formula: SNR = [Signal Strength] - [Interference]
0,0..5,0 5,0..10,0 10,0..15,0 15,0..20,0 20,0..25,0 25,0..30,0 30,0..35,0 35,0..40,0
40,0..45,0 45,0..50,0 50,0..55,0 55,0..60,0 60,0..65,0 65,0..70,0 70,0..75,0 75,0..80,0



 

Interference
Calculated interference
-90,0..-85,0 -85,0..-80,0 -80,0..-75,0 -75,0..-70,0 -70,0..-65,0 -65,0..-60,0 -60,0..-55,0 -55,0..-50,0
-50,0..-45,0 -45,0..-40,0 -40,0..-35,0 -35,0..-30,0 -30,0..-25,0 -25,0..-20,0 -20,0..-15,0 -15,0..-10,0



 

Access Point Count
Displays the number of audible access points per location with respect to the selected minimum RSSI requirement.
1 2 3 4 5 6 7 8



 

Strongest Access Point
Displays the AP which has the strongest signal per location.
00:05:3C:06:25:21 00:E0:03:04:80:8D 00:A0:F8:9D:FB:09 00:A0:F8:9D:B2:B2 00:A0:F8:9D:F8:6A 00:40:96:38:00:41 00:50:DA:90:62:5C 00:50:DA:92:87:B2



 

Data Rate
An estimate of maximum data rate per location, with respect to the selected Signal-To-Noise threshold and the selected wireless network card receiver sensitivity values
1 Mbit/s 2 Mbit/s 5.5 Mbit/s 11 Mbit/s